Drawing Machine - 4xiDraw V1 / XLX - Design Concept - 20180908

___

Drawing Machine - 4xiDraw V1 / XLX - Design concept update - ProfileBlock™

___

3D Design Tool: SketchUp Pro

4xiDraw is a clone of the famous Axidraw. It's a plotter to draw.

Use an "Arduino Nano" control board and a "Arduino Nano CNC Shield" board.

In this video we will build one. We will see the list of components, hardware assembly, wiring harness and the Software part ... Up to the Drawing.

Using the "Inkscape" vector graphics program along with a special "plug in", you can create several G-Code files, starting with a drawing. Universal G-code Sender (Java) will do the rest.

__________________________________________________________

For more details, you can find all the information on Misan’s Instructables page: http://www.instructables.com/id/4xiDraw/

__________________________________________________________

The 4xiDraw V1 / XLX is a special extended edition of the 4xiDraw V1 / A4. While identical in all other aspects, it has twice the travel distance in the X direction, for a total travel area of 23.42 × 8.58 inches, or 595 × 218 mm — enough to fit two full end-to-end pages of US Letter or A4 size paper. Note that this is a "long and skinny" plot area: If you are looking for two pages side by side,.

For all ".STL" 3D Parts: Coming soon....https://www.thingiverse.com/Zalophus/designs

PART LIST: 

- 1 x Arduino Nano V3

- 1 x HC-05 Bluetooth Module

- 2 x A4988 Stepper Motor Driver

- 1 x SG90 RC Micro Servo (plus a 250mm cable extender)

- 2 x NEMA17 Stepper Single Shaft 34mm

- 1 x CNC Nano Shield For Arduino Nano (GRBL Compatible)

- 1 x 12V 2A Power Supply

- 2 x AC 125V 1A SPDT Subminiature Micro Lever Switch

- 12 x M8 x 20mm ID 8mm White Nylon ABS Round No Thread Non-Threaded Hollow Standoff Spacer

- 16 x M8 x 16 x 1.4mm White Nylon Washer Plastic Flat Spacer Washer

- 4 x M4 x 15mm ID 4mm White Nylon ABS Round No Thread Non-Threaded Hollow Standoff Spacer

- 2 x GT2 Timing Pulley 20 teeth Bore 5mm

- 2 x GT2 Timing Pulley 20 teeth Bore 8mm

- 4 x GT2 Timing Belt Idler Pulley Without Teeth 20 Teeth Hole Diameter 5mm

- 1 x GT2 Timing Belt 6mm Wide 2mm Pitch 3m *****

- 8 x Ball Bearing Flanged 4 x 8 x 3mm MF84ZZ

- 8 x Ball Bearing 4 x 8 x 3mm MR84ZZ

- 8 x Acrylic Plate CNC Parts

- 1 x DF2040-740 ProfileBlock™ *****

- 1 x DF2020-370 ProfileBlock™ *****

- 2 x DRF2020-740 ProfileBlock™ *****

- 2 x M5 x 40mm Bolt

- 4 x M5 x 30mm Bolt

- 2 x M5 x 15mm Bolt

- 8 x M5 x 10mm Bolt

- 11 x M5 x 8mm Bolt

- 10 x M5 Nut

- 11 x M5 Nut Nylon

- 4 x M4 x 60mm Bolt

- 4 x M4 x 40mm Bolt

- 4 x M4 x 30mm Bolt

- 18 x M4 Nut

- 8 x M4 Nut Nylon

- 4 x M4 x 6mm Hexagon Double pass copper pillars stud nut

- 4 x M3 x 20mm Bolt

- 6 x M3 x 16mm Bolt

- 18 x M3 x 10mm Bolt

- 14 x M3 x Nut Nylon

- 4 x M3 x 18 + 6mm Hex head Brass Spacing Screws Threaded Pillar StandOff Spacer

- 4 x M3 x 8 + 6mm Hex head Brass Spacing Screws Threaded Pillar StandOff Spacer

- 2 x M3 x 50mm OD5mm Rod Aluminum Spacer

- 4 x M2 x 16mm Bolt

- 4 x M2 Flat Washer

- 4 x M2 Spring Washer

- 4 x M2 Nut

- 4 x M2 Nut Nylon

- 2 x Spring

- ...

For the download Software:

- Arduino IDE: https://www.arduino.cc/

- GRBL + Servo: https://github.com/cprezzi/grbl-servo

- Inkscape: https://inkscape.org

- Plug-In: http://shop.bluecomtech.com/download

- Line Shading Extension (plugin) for Inkscape: http://shop.bluecomtech.com/download

- SquiggleDraw: https://github.com/gwygonik/SquiggleDraw

- StippleGen: https://wiki.evilmadscientist.com/StippleGen

- Python: http://www.python.it/download/

- Universal G-Code Sender: https://github.com/winder/Universal-G-Code-Sender

- Java: https://www.java.com

- LaserGRBL: https://lasergrbl.com/en/download/

### For more information: http://shop.bluecomtech.com

The open source Drawing Machine - Drawing Machine  hardware and software is free and made with love.  Please show your level of support with a voluntary donation.

Donate:

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RDN7ZGAVFS5UE