3D Printed Hexapod Robot – Robonoid – H1 – Design concept – Update – 20180621

___
Hexapod Robot – Robonoid – H1 -Design concept
___
Update design concept 20180621]
– Parts Update: pinshape: https://pinshape.com/items/46664

[ Upload parts 20170418]

[ Upload design concept 20161001]

• https://pinshape.com/items/26844

___

Project Hexapod Robot - H1 - Body Top & Bottom

___

3D Printer: PANDORA DXs - DIY Desktop 3D Printer

Slicer: Cura 15.04.2 

• Layer height (mm): 0.1   
• Shell thickness (mm): 0.8
• Bottom/Top thickness (mm): 1.6  
• Fill Density (%): 20
• Print speed (mm/s): 60   
• Print temperature: 185   
• Bed temperature: 40
• Filament: PLA  
• Filament Diameter (mm): 1.75

Parts List

• Coxa: https://pinshape.com/items/34560
  • 3 x Left
  • 3 x Right
• Femur: https://pinshape.com/items/34559
  • 3 x Left Top
  • 3 x Left Bottom
  • 3 x Right Top
  • 3 x Right Bottom
• Patella: http://pinshape.com/items/34558
  • 3 x Left Top
  • 3 x Left Bottom
  • 3 x Right Top
  • 3 x Right Bottom
• Tibia: https://pinshape.com/items/34556
  • 3 x Left Top
  • 3 x Left Bottom
  • 3 x Right Top
  • 3 x Right Bottom
• 6 x Tarsus: https://pinshape.com/items/34557
• Shield: https://pinshape.com/items/34561
  • 6 x Top
  • 6 x Bottom
  • 6 x Clip Center
  • 12 x Clip Side

• Body: https://pinshape.com/items/46664

  • 1 x Top Plate 
  • 1 x Bottom Plate
  • 1 x Mid Plate(RCB)
  • 1 x Mid Plate(RPi)
  • 1 x Neck Servo Mount
  • 1 x RPi Camera & HC-SR04 Mount 
• Head: https://pinshape.com/items/268...

The open source Hexapod Robot - H1 software is free and made with love.  Please show your level of support with a voluntary donation. 

Zalophus's DesignHouse: http://zalophus.tistory.com/ and https://zddh.blogspot.com/