Zalophus's DesignHouse

DIY 3D Printer PANDORA DXs 본문

3D Printer

DIY 3D Printer PANDORA DXs

Zalophus Dokdo 2017. 10. 30. 15:04
반응형


DIY 3D Printer - PANDORA DXs (Design eXtreme single)
3D Design Tool: SketchUp Pro 


Technical Specifications 


Printing 


Technology: FFF(Fused Filament Fabrication) / H-Bot(CoreXY)
Build Volume: 223 (W) x 225 (D) x 165 (H) mm 

  • Heatbed
    Layer Resolution: 50-200 microns
    Filament: ABS or PLA, Nyron, HIPS, PVA... 1.75 mm diameter
    Nozzle Diameter: 0.4 mm (0.2mm, 0.3mm, 0.8mm)
    Print File Type: .Gcode, .STL
    Layer Resolutions: 
  • Fast: 200 micron (0.2 mm) 
  • Normal: 100 micron (0.1 mm) 
  • hHigh: 0.06 micron (0.06 mm) 
  • Ultra High: 0,04 micron (0.04 mm) 

    Size and Weight 


    Product Dimensions: 426 (W) x 433 (D) x 500 (H) mm
    Product Weight: 11 kg 


    Software 


    Software Bundle: Cura, Slic3r, KISSlicer / Octoprint, Printrun, Repetier-Host, MatterControl
    Supported File Types: .STL, .OBJ, .AMF, .Gcode
    Operating Systems: All (Web-based): Windows, Mac OS, Linux 


    Firmware 


    Arduino: Modified Marlin v1.0.0
    Raspberry Pi: Rasbian, Octoprint, SSH, Samba, VNC, WiringPi 


    Hardware 


    Base Plate: Profile DRF 3030, Acrylic
    Step Motor: NEMA 17 - Phase: 4, Step Angle: 1.8 Deg/Step, Holding Torque: 2.6Kg.cm 

  • X/Y/Z/E - 4EA
    Cartesian (xyz): X/Y Head: LM Guide, Z Bed: 10mm Linear Shaft and 8D Screw Rod 

    Electrical 


    Control Board: Arduino Mega 2560
    Control Shield: Ramps 1.4 Board
    Display Board: Reprap Discount Smart Controller LCD 2004
    Raspberry Pi: Raspberry Pi B
    Camera: Raspberry Camera
    Power Requirements: AC 100 - 240 V, 1.4 Amps, 50-60 Hz, 220 W
    Connectivity: USB, SD Card, Wi-Fi (Web-based)
    Temperature: 

  • Nozzle temperature: 170 - 270 
  • Heated bed temperature: 50 - 100 
  • Operational temperature: 10 - 40 
  • Storage temperature: 0 - 32 

    https://www.thingiverse.com/thing:917718


    Thanks for watching!........Coming soon!........Updating......

The open source PANDORA DXs hardware and software is free and made with love. Please show your level of support with a voluntary donation.

Donate:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=RDN7ZGAVFS5UE






반응형

'3D Printer' 카테고리의 다른 글

PANDORA Junior DXs - 3D Design Concept  (0) 2017.12.12
DIY Delta 3D Printer - HexaBot  (0) 2017.10.30
Comments